These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Valve Type
High-Performance
Operation
Solenoid Operated
Solenoid Code
GL
Electrical Connection
No Connector
Reducer Module
N/A
Surge Suppressor/Damper
None
Solenoid
Double
Function Code
2
Pilot/Drain
None
Port T Code
7
Mechanical Options
None
Housing Code
W
Design No.
60
Indicator Lights
Yes
Pilot Valve Type
N/A
Spool Shift Timing
N/A
Spool Spring Arrangement Code
C
Actuator Type
Solenoid
Solenoid Energization Code
None
Function
3-Position Spring Centered
Coil Rating Code
GL
Cycle Rate [Max]
N/A
Port Restrictor Plug Code
None
Response Type
Standard Response
Electrical Connector Code
None
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper Code
None
Center Position
All Ports Blocked
Port T Pressure Rating
3000 psi
Pressure [Max]
5075 psi
AC/DC
DC
Pressure Port Check Valve Pressure
N/A
Spool Indicator Switch Code
None
EN Code
EN21
Port Restrictor Plugs
None
Voltage & Frequency
12 VDC, Low Power Coil
Spool Code
2
Coil Type Code
F
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Overrides
No Overrides
Solenoid Indicator Lights Code
L
NFPA Size
D03
Seal Material
Buna-N
Electrical Options
None
Crossover
All Ports Blocked
Manual Override Option Code
H
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
