These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Valve Type
High-Performance
Indicator Lights
Yes
Electrical Options
None
Coil Rating Code
GL
Seal Material
Buna-N
Housing Code
W
Solenoid
Double
Pilot/Drain
None
Port Restrictor Plug Code
None
Mechanical Options
None
Operation
Solenoid Operated
Cycle Rate [Max]
N/A
Spool Shift Timing
N/A
Crossover
All Ports Open
Spool Code
0
Actuator Type
Solenoid
Center Position
All Ports Open
Rated Flow [Max]
21 gal/min
Function
3-Position Spring Centered
Design No.
60
Port T Code
7
Manual Override Option Code
None
Reducer Module
N/A
EN Code
None
Surge Suppressor/Damper Code
None
Solenoid Indicator Lights Code
L
AC/DC
DC
Port T Pressure Rating
3000 psi
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Surge Suppressor/Damper
None
Function Code
0
Spool Spring Arrangement Code
C
Pilot Valve Type
N/A
Solenoid Energization Code
None
Coil Type Code
F
NFPA Size
D03
Port Restrictor Plugs
None
Response Type
Standard Response
Spool Indicator Switch Code
None
Voltage & Frequency
12 VDC, Low Power Coil
Solenoid Code
GL
Electrical Connector Code
T
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Overrides
No Overrides
Electrical Connection
Wired Terminal Block
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
