These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
All Ports Open
Electrical Connection
Wired Terminal Block
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Solenoid Indicator Lights Code
L
Surge Suppressor/Damper Code
None
Voltage & Frequency
12 VDC, Low Power Coil
Manual Override Option Code
None
Reducer Module
N/A
Pressure [Max]
5075 psi
Housing Code
W
Function
3-Position Spring Centered
Pilot/Drain
None
Electrical Connector Code
T
Solenoid Energization Code
None
Electrical Options
None
EN Code
None
Valve Type
High-Performance
Port Restrictor Plugs
None
Port T Code
7
Response Type
Standard Response
Function Code
0
Seal Material
Buna-N
Operation
Solenoid Operated
Solenoid Code
GL
Crossover
All Ports Open
Cycle Rate [Max]
N/A
Spool Code
0
Indicator Lights
Yes
Rated Flow [Max]
21 gal/min
Spool Spring Arrangement Code
C
Port Restrictor Plug Code
None
Solenoid
Double
Actuator Type
Solenoid
Pilot Valve Type
N/A
Spool Shift Timing
N/A
Mechanical Options
None
Design No.
60
NFPA Size
D03
Port T Pressure Rating
3000 psi
Pressure Port Check Valve Pressure
N/A
Surge Suppressor/Damper
None
Overrides
No Overrides
Coil Type Code
F
Coil Rating Code
GL
Spool Indicator Switch Code
None
AC/DC
DC
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
