These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Response Type
Standard Response
Cycle Rate [Max]
N/A
Seal Material
Buna-N
Function Code
6
Port Restrictor Plug Code
None
Pilot Valve Type
N/A
Indicator Lights
No
Port T Pressure Rating
3000 psi
Pressure Port Check Valve Pressure
N/A
Pilot/Drain
None
Solenoid Energization Code
None
Spool Indicator Switch Code
None
Valve Type
High-Performance
Reducer Module
N/A
Rated Flow [Max]
21 gal/min
Crossover
P Blocked, A or B to T
Surge Suppressor/Damper Code
None
Solenoid
Double
Mechanical Options
None
Operation
Solenoid Operated
Electrical Options
None
Center Position
P Blocked, A & B to T
Electrical Connector Code
None
Manual Override Option Code
None
Port T Code
7
Function
3-Position Spring Centered
Voltage & Frequency
12 VDC
Spool Code
6
NFPA Size
D03
Solenoid Code
G
Pressure [Max]
5075 psi
Overrides
No Overrides
Spool Shift Timing
N/A
Port Restrictor Plugs
None
Coil Rating Code
G
Coil Type Code
KU
Surge Suppressor/Damper
None
EN Code
None
Housing Code
None
AC/DC
DC
Solenoid Indicator Lights Code
None
Actuator Type
Solenoid
Electrical Connection
No Connector
Design No.
60
Coil Type
Top Exit Flying Leads
Spool Spring Arrangement Code
C
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
