These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Manual Override Option Code
None
Design No.
60
Coil Rating Code
G
NFPA Size
D03
Electrical Options
None
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Seal Material
Buna-N
Mechanical Options
None
Surge Suppressor/Damper Code
None
Reducer Module
N/A
Voltage & Frequency
12 VDC
Spool Shift Timing
N/A
Solenoid Code
G
Spool Indicator Switch Code
None
Port T Pressure Rating
3000 psi
EN Code
None
Pilot/Drain
None
Solenoid Energization Code
None
Electrical Connector Code
None
Crossover
P Blocked, A or B to T
Rated Flow [Max]
21 gal/min
Response Type
Standard Response
Surge Suppressor/Damper
None
Overrides
No Overrides
Indicator Lights
No
Coil Type
Top Exit Flying Leads
Operation
Solenoid Operated
Function Code
6
Coil Type Code
KU
Actuator Type
Solenoid
Solenoid Indicator Lights Code
None
Spool Spring Arrangement Code
C
Valve Type
High-Performance
Center Position
P Blocked, A & B to T
Solenoid
Double
AC/DC
DC
Electrical Connection
No Connector
Function
3-Position Spring Centered
Port Restrictor Plugs
None
Port T Code
7
Spool Code
6
Cycle Rate [Max]
N/A
Housing Code
None
Pilot Valve Type
N/A
Port Restrictor Plug Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
