These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Mechanical Options
None
Spool Spring Arrangement Code
BL
Function
2-Position Spring Offset, End to Center
Pressure Port Check Valve Pressure
N/A
Solenoid
Single
Spool Indicator Switch Code
None
Electrical Connection
DIN 43650
Solenoid Energization Code
None
Seal Material
Buna-N
Port T Pressure Rating
3000 psi
Electrical Connector Code
None
Overrides
No Overrides
Reducer Module
N/A
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Design No.
60
Function Code
0
Coil Rating Code
B
Surge Suppressor/Damper
None
Spool Shift Timing
N/A
Pressure [Max]
5075 psi
Coil Type Code
U
Spool Code
0
Solenoid Indicator Lights Code
None
Port Restrictor Plug Code
P10
Housing Code
None
Port Restrictor Plugs
1 mm Diameter - P Port
Indicator Lights
No
Response Type
Standard Response
Crossover
All Ports Open
Valve Type
High-Performance
Center Position
All Ports Open
Surge Suppressor/Damper Code
None
Electrical Options
None
Solenoid Code
B
Pilot/Drain
None
EN Code
EN21
Operation
Solenoid Operated
Pilot Valve Type
N/A
Coil Type
DIN 43650
Manual Override Option Code
None
NFPA Size
D03
Port T Code
6
AC/DC
AC
Voltage & Frequency
110/120 VAC – 50/60 Hz
Rated Flow [Max]
21 gal/min
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
