These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Manual Override Option Code
None
Overrides
No Overrides
Center Position
All Ports Open
Electrical Options
None
Surge Suppressor/Damper
None
NFPA Size
D03
Electrical Connector Code
None
Function
2-Position Spring Offset, End to Center
Pilot Valve Type
N/A
Reducer Module
N/A
AC/DC
AC
Crossover
All Ports Open
Pressure [Max]
5075 psi
Housing Code
None
Function Code
0
Coil Type Code
U
Solenoid
Single
Operation
Solenoid Operated
Response Type
Standard Response
Port T Code
6
Solenoid Energization Code
None
Coil Type
DIN 43650
Cycle Rate [Max]
N/A
EN Code
EN21
Port Restrictor Plugs
1 mm Diameter - P Port
Port Restrictor Plug Code
P10
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
None
Coil Rating Code
B
Design No.
60
Solenoid Code
B
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper Code
None
Actuator Type
Solenoid
Port T Pressure Rating
3000 psi
Voltage & Frequency
110/120 VAC – 50/60 Hz
Pilot/Drain
None
Mechanical Options
None
Indicator Lights
No
Spool Shift Timing
N/A
Spool Spring Arrangement Code
BL
Spool Indicator Switch Code
None
Valve Type
High-Performance
Spool Code
0
Electrical Connection
DIN 43650
Seal Material
Buna-N
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
