Find a Service Center
- D05 Double Solenoid Operated Valve
- 220 VAC - 50 Hz
- Lead Wires w/Terminal Box
- Flying Leads
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Port Restrictor Plugs | None |
| Pilot/Drain | None |
| Pilot Valve Type | N/A |
| Pressure Port Check Valve Pressure | N/A |
| Operation | Solenoid Operated |
| Spool Code | 6 |
| Cycle Rate [Max] | N/A |
| Coil Rating Code | C |
| Pressure [Max] | 3600 psi |
| Electrical Connection | Lead Wires w/ Terminal Box |
| Voltage & Frequency | 220 VAC – 50 Hz |
| Actuator Type | Solenoid |
| Flow Direction Code | 4 |
| Design No. | 60 |
| Rated Flow [Max] | 25 gal/min |
| Port T Pressure Rating | 1000 psi |
| Electrical Options Code | W |
| NFPA Size | D05 |
| Mechanical Options Code | None |
| Coil Type | Flying Leads |
| Indicator Lights | No |
| Mechanical Options | None |
| Crossover | P Blocked, A or B to T |
| Coil Type Code | None |
| Reducer Module | N/A |
| Surge Suppressor/Damper | None |
| Center Position | P Blocked, A & B to T |
| Seal Material | Buna-N |
| Electrical Options | None |
| Solenoid | Double |
| AC/DC | AC |
| Response Type | Standard Response |
| Function | 3-Position Spring Centered |
| Spool Spring Arrangement Code | C |
| Valve Type | Standard-Duty |
| Overrides | No Overrides |
| Weight | 10.0 LB |
