Find a Service Center
- D05 Double Solenoid Operated Valve
- 220 VAC - 50 Hz
- Lead Wires w/Terminal Box
- Flying Leads
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Voltage & Frequency | 220 VAC – 50 Hz |
| Coil Rating Code | C |
| Overrides | No Overrides |
| Pressure [Max] | 3600 psi |
| Electrical Options | None |
| Mechanical Options | None |
| Port T Pressure Rating | 1000 psi |
| Pilot Valve Type | N/A |
| Solenoid | Double |
| Operation | Solenoid Operated |
| Design No. | 60 |
| Mechanical Options Code | None |
| Valve Type | Standard-Duty |
| Pilot/Drain | None |
| Coil Type | Flying Leads |
| Actuator Type | Solenoid |
| Flow Direction Code | 4 |
| Pressure Port Check Valve Pressure | N/A |
| Spool Spring Arrangement Code | C |
| Center Position | P Blocked, A & B to T |
| Electrical Options Code | W |
| Electrical Connection | Lead Wires w/ Terminal Box |
| Crossover | P Blocked, A or B to T |
| Response Type | Standard Response |
| Seal Material | Buna-N |
| Rated Flow [Max] | 25 gal/min |
| Port Restrictor Plugs | None |
| Surge Suppressor/Damper | None |
| Coil Type Code | None |
| NFPA Size | D05 |
| Indicator Lights | No |
| Reducer Module | N/A |
| Spool Code | 6 |
| Cycle Rate [Max] | N/A |
| AC/DC | AC |
| Function | 3-Position Spring Centered |
| Weight | 10.0 LB |
