These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Voltage & Frequency
110/120 VAC – 50/60 Hz
Solenoid
Single
Port Restrictor Plugs
None
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plug Code
None
Spool Spring Arrangement Code
A
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Port T Code
6
Cycle Rate [Max]
N/A
Port T Pressure Rating
3000 psi
Spool Code
2
Manual Override Option Code
H
Center Position
All Ports Blocked
Indicator Lights
Yes
Housing Code
W
Solenoid Indicator Lights Code
L
Response Type
Standard Response
Actuator Type
Solenoid
Coil Rating Code
B
Coil Type Code
F
Valve Type
High-Performance
AC/DC
AC
Electrical Connection
Five Pin Connector
Rated Flow [Max]
21 gal/min
Electrical Options
None
Reducer Module
N/A
Solenoid Code
B
Crossover
All Ports Blocked
Seal Material
Buna-N
Pilot Valve Type
N/A
Mechanical Options
None
Design No.
60
Solenoid Energization Code
None
Electrical Connector Code
PA5
Spool Indicator Switch Code
None
Surge Suppressor/Damper Code
None
EN Code
None
NFPA Size
D03
Function
2-Position Spring Offset, End to End
Pilot/Drain
None
Function Code
2
Surge Suppressor/Damper
None
Spool Shift Timing
N/A
Overrides
No Overrides
Operation
Solenoid Operated
Pressure [Max]
5075 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back