These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Center Position
All Ports Blocked
Surge Suppressor/Damper Code
None
Function Code
2
Rated Flow [Max]
21 gal/min
Solenoid Energization Code
None
Design No.
60
Function
2-Position Spring Offset, End to End
Spool Shift Timing
N/A
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plug Code
None
Solenoid Indicator Lights Code
L
Electrical Connector Code
PA5
Actuator Type
Solenoid
Cycle Rate [Max]
N/A
Pilot Valve Type
N/A
Port T Code
6
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot/Drain
None
Solenoid
Single
Mechanical Options
None
Seal Material
Buna-N
Overrides
No Overrides
EN Code
None
Electrical Connection
Five Pin Connector
Crossover
All Ports Blocked
Housing Code
W
Surge Suppressor/Damper
None
Spool Spring Arrangement Code
A
Solenoid Code
B
Pressure [Max]
5075 psi
Coil Rating Code
B
AC/DC
AC
Indicator Lights
Yes
Operation
Solenoid Operated
Port T Pressure Rating
3000 psi
Electrical Options
None
NFPA Size
D03
Port Restrictor Plugs
None
Reducer Module
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz
Spool Code
2
Valve Type
High-Performance
Response Type
Standard Response
Coil Type Code
F
Manual Override Option Code
H
Spool Indicator Switch Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back