These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Shift Timing
N/A
Design No.
60
Pilot/Drain
None
Indicator Lights
Yes
Surge Suppressor/Damper Code
None
Pressure Port Check Valve Pressure
N/A
Solenoid Indicator Lights Code
L
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Actuator Type
Solenoid
Coil Type Code
F
Spool Code
0
Solenoid
Double
Port Restrictor Plugs
None
EN Code
None
Crossover
All Ports Open
Seal Material
Buna-N
Mechanical Options
None
Pilot Valve Type
N/A
Electrical Options
None
Housing Code
W
NFPA Size
D03
Center Position
All Ports Open
Pressure [Max]
5075 psi
Overrides
No Overrides
Solenoid Code
H
Manual Override Option Code
None
Valve Type
High-Performance
Coil Rating Code
H
Rated Flow [Max]
21 gal/min
Solenoid Energization Code
None
Function
3-Position Spring Centered
Surge Suppressor/Damper
None
Function Code
0
Port Restrictor Plug Code
None
Response Type
Standard Response
Spool Indicator Switch Code
None
Spool Spring Arrangement Code
C
AC/DC
DC
Electrical Connection
Five Pin Connector
Reducer Module
N/A
Cycle Rate [Max]
N/A
Electrical Connector Code
PA5
Port T Pressure Rating
3000 psi
Voltage & Frequency
24 VDC
Operation
Solenoid Operated
Port T Code
7
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
