These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Response Type
Standard Response
NFPA Size
D03
Electrical Connection
Five Pin Connector
Pilot/Drain
None
EN Code
None
Spool Spring Arrangement Code
C
Cycle Rate [Max]
N/A
Solenoid
Double
Solenoid Code
H
Pressure [Max]
5075 psi
Coil Type Code
F
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Function Code
0
Spool Shift Timing
N/A
Surge Suppressor/Damper Code
None
Voltage & Frequency
24 VDC
Crossover
All Ports Open
Seal Material
Buna-N
Pilot Valve Type
N/A
Actuator Type
Solenoid
Coil Rating Code
H
Function
3-Position Spring Centered
Pressure Port Check Valve Pressure
N/A
Housing Code
W
Indicator Lights
Yes
Port T Pressure Rating
3000 psi
Spool Indicator Switch Code
None
Surge Suppressor/Damper
None
Reducer Module
N/A
Overrides
No Overrides
Design No.
60
Electrical Connector Code
PA5
Solenoid Energization Code
None
Operation
Solenoid Operated
Port T Code
7
Port Restrictor Plug Code
None
Mechanical Options
None
AC/DC
DC
Electrical Options
None
Solenoid Indicator Lights Code
L
Manual Override Option Code
None
Center Position
All Ports Open
Rated Flow [Max]
21 gal/min
Port Restrictor Plugs
None
Spool Code
0
Valve Type
High-Performance
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
