Find a Service Center
- D05 Double Solenoid Operated Valve
- 24 VDC
- Lead Wires
- Connector Fitted
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Actuator Type | Solenoid |
| Electrical Connection | Lead Wires |
| Coil Type | Connector Fitted |
| Crossover | All Ports Blocked |
| Voltage & Frequency | 24 VDC |
| Indicator Lights | No |
| Mechanical Options | None |
| Cycle Rate [Max] | N/A |
| Pilot Valve Type | N/A |
| Overrides | No Overrides |
| Reducer Module | N/A |
| Design No. | 60 |
| Electrical Options Code | None |
| Spool Spring Arrangement Code | C |
| Operation | Solenoid Operated |
| Flow Direction Code | 4 |
| Spool Code | 2 |
| Center Position | All Ports Blocked |
| AC/DC | DC |
| Rated Flow [Max] | 25 gal/min |
| Solenoid | Double |
| Pressure Port Check Valve Pressure | N/A |
| Electrical Options | None |
| Pilot/Drain | None |
| Port Restrictor Plugs | None |
| Surge Suppressor/Damper | None |
| Coil Type Code | U1 |
| Coil Rating Code | H |
| Seal Material | Buna-N |
| Port T Pressure Rating | 1000 psi |
| Response Type | Standard Response |
| Mechanical Options Code | None |
| Function | 3-Position Spring Centered |
| Pressure [Max] | 3600 psi |
| NFPA Size | D05 |
| Valve Type | Standard-Duty |
| Weight | 10.0 LB |
