Find a Service Center
- D05 Double Solenoid Operated Valve
- 24 VDC
- Lead Wires
- Connector Fitted
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Rated Flow [Max] | 25 gal/min |
| AC/DC | DC |
| Cycle Rate [Max] | N/A |
| Electrical Connection | Lead Wires |
| Response Type | Standard Response |
| Indicator Lights | No |
| Mechanical Options | None |
| Crossover | All Ports Blocked |
| Coil Type Code | U1 |
| NFPA Size | D05 |
| Mechanical Options Code | None |
| Coil Rating Code | H |
| Pilot/Drain | None |
| Solenoid | Double |
| Port Restrictor Plugs | None |
| Center Position | All Ports Blocked |
| Electrical Options Code | None |
| Seal Material | Buna-N |
| Pressure Port Check Valve Pressure | N/A |
| Spool Spring Arrangement Code | C |
| Spool Code | 2 |
| Valve Type | Standard-Duty |
| Port T Pressure Rating | 1000 psi |
| Pilot Valve Type | N/A |
| Design No. | 60 |
| Coil Type | Connector Fitted |
| Flow Direction Code | 4 |
| Operation | Solenoid Operated |
| Electrical Options | None |
| Pressure [Max] | 3600 psi |
| Actuator Type | Solenoid |
| Surge Suppressor/Damper | None |
| Voltage & Frequency | 24 VDC |
| Function | 3-Position Spring Centered |
| Overrides | No Overrides |
| Reducer Module | N/A |
| Weight | 10.0 LB |
