These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Options
None
Port Restrictor Plugs
None
Spool Spring Arrangement Code
C
Pilot Valve Type
N/A
AC/DC
DC
Valve Type
High-Performance
Voltage & Frequency
12 VDC
Reducer Module
N/A
Port Restrictor Plug Code
None
Design No.
61
Spool Code
8
Surge Suppressor/Damper Code
None
Function
3-Position Spring Centered
Center Position
P to T, A & B Blocked
Overrides
No Overrides
Indicator Lights
No
Crossover
All Ports Open, Restricted
Response Type
Standard Response
Actuator Type
Solenoid
Port T Code
7
Rated Flow [Max]
21 gal/min
Function Code
8
Solenoid Code
G
Coil Type
Dual 6.3 mm Spade
NFPA Size
D03
EN Code
None
Spool Shift Timing
N/A
Mechanical Options
None
Solenoid Indicator Lights Code
None
Coil Rating Code
G
Electrical Connector Code
None
Pressure Port Check Valve Pressure
N/A
Pressure [Max]
5075 psi
Surge Suppressor/Damper
None
Housing Code
None
Solenoid Energization Code
V
Seal Material
Buna-N
Electrical Connection
No Connector
Operation
Solenoid Operated
Coil Type Code
SP2
Solenoid
Double
Spool Indicator Switch Code
None
Pilot/Drain
None
Cycle Rate [Max]
N/A
Manual Override Option Code
H
Port T Pressure Rating
3000 psi
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
