These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pressure [Max]
5075 psi
Operation
Solenoid Operated
Coil Rating Code
G
Rated Flow [Max]
21 gal/min
Port Restrictor Plugs
None
Manual Override Option Code
H
Function
3-Position Spring Centered
Seal Material
Buna-N
Overrides
No Overrides
Pressure Port Check Valve Pressure
N/A
Solenoid Energization Code
V
Center Position
P to T, A & B Blocked
Pilot/Drain
None
Design No.
61
Solenoid Code
G
Electrical Options
None
Housing Code
None
Port Restrictor Plug Code
None
Spool Indicator Switch Code
None
Spool Code
8
Surge Suppressor/Damper
None
Coil Type
Dual 6.3 mm Spade
Response Type
Standard Response
NFPA Size
D03
EN Code
None
Coil Type Code
SP2
Electrical Connector Code
None
Crossover
All Ports Open, Restricted
Solenoid
Double
Surge Suppressor/Damper Code
None
Spool Shift Timing
N/A
Cycle Rate [Max]
N/A
Actuator Type
Solenoid
AC/DC
DC
Reducer Module
N/A
Indicator Lights
No
Pilot Valve Type
N/A
Solenoid Indicator Lights Code
None
Port T Pressure Rating
3000 psi
Spool Spring Arrangement Code
C
Electrical Connection
No Connector
Mechanical Options
None
Voltage & Frequency
12 VDC
Port T Code
7
Valve Type
High-Performance
Function Code
8
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
