These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Operation
Solenoid Operated
Solenoid Code
H
Solenoid Energization Code
None
Solenoid Indicator Lights Code
L
Port Restrictor Plug Code
None
Solenoid
Double
Indicator Lights
Yes
Mechanical Options
None
Pilot Valve Type
N/A
Electrical Connector Code
T
Coil Rating Code
H
Spool Indicator Switch Code
None
Housing Code
W
Pilot/Drain
None
Electrical Options
None
Valve Type
High-Performance
Reducer Module
N/A
Port T Code
7
AC/DC
DC
Pressure [Max]
5075 psi
Electrical Connection
Wired Terminal Block
EN Code
None
Crossover
P Blocked, A or B to T
Pressure Port Check Valve Pressure
N/A
Overrides
No Overrides
Actuator Type
Solenoid
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper
None
Coil Type Code
F
Spool Code
6
Port T Pressure Rating
3000 psi
Center Position
P Blocked, A & B to T
Spool Spring Arrangement Code
N
Spool Shift Timing
N/A
Function
3-Position Detented
Seal Material
Buna-N
Manual Override Option Code
None
Response Type
Standard Response
Function Code
6
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
NFPA Size
D03
Surge Suppressor/Damper Code
None
Design No.
60
Voltage & Frequency
24 VDC
Cycle Rate [Max]
N/A
Port Restrictor Plugs
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
