These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Spool Indicator Switch Code
None
Operation
Solenoid Operated
Port Restrictor Plugs
None
AC/DC
DC
Housing Code
W
Solenoid Code
H
Manual Override Option Code
None
Coil Type Code
F
Indicator Lights
Yes
Function Code
6
Solenoid
Double
Function
3-Position Detented
Solenoid Energization Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
EN Code
None
Coil Rating Code
H
Pressure Port Check Valve Pressure
N/A
Port T Code
7
NFPA Size
D03
Cycle Rate [Max]
N/A
Voltage & Frequency
24 VDC
Reducer Module
N/A
Port T Pressure Rating
3000 psi
Spool Shift Timing
N/A
Mechanical Options
None
Surge Suppressor/Damper Code
None
Port Restrictor Plug Code
None
Seal Material
Buna-N
Spool Code
6
Electrical Options
None
Rated Flow [Max]
21 gal/min
Pilot/Drain
None
Electrical Connector Code
T
Surge Suppressor/Damper
None
Spool Spring Arrangement Code
N
Pressure [Max]
5075 psi
Design No.
60
Solenoid Indicator Lights Code
L
Overrides
No Overrides
Crossover
P Blocked, A or B to T
Electrical Connection
Wired Terminal Block
Center Position
P Blocked, A & B to T
Pilot Valve Type
N/A
Actuator Type
Solenoid
Response Type
Standard Response
Valve Type
High-Performance
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
