These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Valve Type
High-Performance
Port Restrictor Plugs
None
NFPA Size
D03
Pressure Port Check Valve Pressure
N/A
Coil Rating Code
G
Solenoid Energization Code
None
Mechanical Options
None
Function
3-Position Spring Centered
Seal Material
Buna-N
Operation
Solenoid Operated
Voltage & Frequency
12 VDC
Response Type
Standard Response
Electrical Connector Code
None
Reducer Module
N/A
Manual Override Option Code
None
Electrical Connection
No Connector
EN Code
None
Port T Pressure Rating
3000 psi
Solenoid Code
G
Port Restrictor Plug Code
None
Spool Shift Timing
N/A
Cycle Rate [Max]
N/A
Design No.
60
Actuator Type
Solenoid
Overrides
No Overrides
Pilot/Drain
None
Rated Flow [Max]
21 gal/min
Crossover
All Ports Blocked
Coil Type
Top Exit Flying Leads
Indicator Lights
No
Pressure [Max]
5075 psi
Surge Suppressor/Damper
None
Spool Code
2
Electrical Options
None
Coil Type Code
KU
Center Position
All Ports Blocked
Spool Spring Arrangement Code
C
Surge Suppressor/Damper Code
None
Function Code
2
Spool Indicator Switch Code
None
Pilot Valve Type
N/A
AC/DC
DC
Solenoid Indicator Lights Code
None
Housing Code
None
Port T Code
7
Solenoid
Double
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
