These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Actuator Type
Solenoid
Spool Indicator Switch Code
None
Mechanical Options
None
Cycle Rate [Max]
N/A
Overrides
No Overrides
Spool Code
2
Coil Rating Code
G
EN Code
None
Pressure [Max]
5075 psi
Port T Code
7
Spool Shift Timing
N/A
Response Type
Standard Response
Solenoid Energization Code
None
Port Restrictor Plugs
None
Reducer Module
N/A
Coil Type
Top Exit Flying Leads
Function Code
2
Electrical Options
None
Spool Spring Arrangement Code
C
Crossover
All Ports Blocked
Pilot Valve Type
N/A
Solenoid Code
G
Operation
Solenoid Operated
Seal Material
Buna-N
Surge Suppressor/Damper Code
None
Housing Code
None
Port T Pressure Rating
3000 psi
Design No.
60
AC/DC
DC
Electrical Connector Code
None
Center Position
All Ports Blocked
Function
3-Position Spring Centered
NFPA Size
D03
Port Restrictor Plug Code
None
Rated Flow [Max]
21 gal/min
Manual Override Option Code
None
Valve Type
High-Performance
Indicator Lights
No
Voltage & Frequency
12 VDC
Solenoid
Double
Pressure Port Check Valve Pressure
N/A
Surge Suppressor/Damper
None
Solenoid Indicator Lights Code
None
Electrical Connection
No Connector
Pilot/Drain
None
Coil Type Code
KU
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
