These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Housing Code
None
Spool Code
6
Pilot Valve Type
N/A
Spool Indicator Switch Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
AC/DC
AC
Surge Suppressor/Damper
None
Cycle Rate [Max]
N/A
Solenoid
Double
Design No.
60
Port Restrictor Plugs
None
Electrical Connector Code
None
Port T Code
6
Rated Flow [Max]
21 gal/min
Electrical Connection
DIN 43650
Coil Type
DIN 43650
Coil Type Code
U
Valve Type
High-Performance
Seal Material
Buna-N
Pressure [Max]
5075 psi
Pilot/Drain
None
EN Code
None
Electrical Options
None
Solenoid Code
B
Crossover
P Blocked, A or B to T
Solenoid Indicator Lights Code
None
NFPA Size
D03
Actuator Type
Solenoid
Function
3-Position Detented
Response Type
Standard Response
Port T Pressure Rating
3000 psi
Mechanical Options
None
Function Code
6
Reducer Module
N/A
Manual Override Option Code
H
Spool Spring Arrangement Code
N
Overrides
No Overrides
Coil Rating Code
B
Indicator Lights
No
Spool Shift Timing
N/A
Port Restrictor Plug Code
None
Surge Suppressor/Damper Code
None
Operation
Solenoid Operated
Pressure Port Check Valve Pressure
N/A
Solenoid Energization Code
None
Center Position
P Blocked, A & B to T
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
