These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pilot/Drain
None
Actuator Type
Solenoid
EN Code
None
Pilot Valve Type
N/A
Pressure [Max]
5075 psi
Coil Type Code
U
Mechanical Options
None
Manual Override Option Code
H
Solenoid Energization Code
None
Spool Shift Timing
N/A
Valve Type
High-Performance
Seal Material
Buna-N
Coil Rating Code
B
Port T Code
6
Surge Suppressor/Damper Code
None
Indicator Lights
No
Housing Code
None
Spool Spring Arrangement Code
N
Design No.
60
Surge Suppressor/Damper
None
Crossover
P Blocked, A or B to T
Cycle Rate [Max]
N/A
Pressure Port Check Valve Pressure
N/A
Coil Type
DIN 43650
Port Restrictor Plug Code
None
AC/DC
AC
Spool Code
6
Center Position
P Blocked, A & B to T
Response Type
Standard Response
Port T Pressure Rating
3000 psi
Reducer Module
N/A
Solenoid Code
B
Operation
Solenoid Operated
Function
3-Position Detented
Electrical Connector Code
None
Port Restrictor Plugs
None
Rated Flow [Max]
21 gal/min
Overrides
No Overrides
NFPA Size
D03
Solenoid Indicator Lights Code
None
Solenoid
Double
Electrical Connection
DIN 43650
Electrical Options
None
Function Code
6
Spool Indicator Switch Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
