These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Options
None
Actuator Type
Solenoid
Surge Suppressor/Damper Code
None
Operation
Solenoid Operated
Center Position
All Ports Blocked
Reducer Module
N/A
Pilot/Drain
None
Electrical Connector Code
None
Pilot Valve Type
N/A
Valve Type
High-Performance
Port Restrictor Plugs
None
Port Restrictor Plug Code
None
Function
3-Position Spring Centered
EN Code
None
NFPA Size
D03
Electrical Connection
DIN 43650
Design No.
60
Housing Code
None
Surge Suppressor/Damper
None
Coil Type Code
U
Indicator Lights
No
Solenoid
Double
Function Code
2
Coil Type
DIN 43650
Seal Material
Buna-N
Mechanical Options
None
Spool Indicator Switch Code
None
Response Type
Standard Response
Solenoid Energization Code
None
Overrides
No Overrides
Port T Pressure Rating
3000 psi
AC/DC
DC
Pressure Port Check Valve Pressure
N/A
Spool Spring Arrangement Code
C
Cycle Rate [Max]
N/A
Voltage & Frequency
24 VDC
Pressure [Max]
5075 psi
Rated Flow [Max]
21 gal/min
Spool Code
2
Solenoid Code
H
Spool Shift Timing
N/A
Manual Override Option Code
Z
Crossover
All Ports Blocked
Solenoid Indicator Lights Code
None
Coil Rating Code
H
Port T Code
7
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
