These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Surge Suppressor/Damper
None
Pilot/Drain
None
Rated Flow [Max]
21 gal/min
Voltage & Frequency
24 VDC
Function
3-Position Spring Centered
Housing Code
None
Solenoid Code
H
Pressure Port Check Valve Pressure
N/A
Seal Material
Buna-N
Solenoid
Double
Port Restrictor Plugs
None
Port Restrictor Plug Code
None
Spool Indicator Switch Code
None
Reducer Module
N/A
Coil Rating Code
H
Function Code
2
Design No.
60
Solenoid Energization Code
None
Spool Code
2
Solenoid Indicator Lights Code
None
Coil Type
DIN 43650
Crossover
All Ports Blocked
Response Type
Standard Response
Electrical Connector Code
None
AC/DC
DC
Electrical Options
None
NFPA Size
D03
Valve Type
High-Performance
Pressure [Max]
5075 psi
Port T Pressure Rating
3000 psi
Port T Code
7
Cycle Rate [Max]
N/A
Mechanical Options
None
Center Position
All Ports Blocked
Coil Type Code
U
Spool Shift Timing
N/A
Indicator Lights
No
Surge Suppressor/Damper Code
None
Pilot Valve Type
N/A
Overrides
No Overrides
Actuator Type
Solenoid
Manual Override Option Code
Z
Spool Spring Arrangement Code
C
Electrical Connection
DIN 43650
Operation
Solenoid Operated
EN Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
