These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pilot/Drain
None
Solenoid Energization Code
None
Overrides
No Overrides
Cycle Rate [Max]
N/A
Electrical Connector Code
None
Center Position
All Ports Open
Housing Code
W
Seal Material
Buna-N
Port T Pressure Rating
150 psi
Response Type
Standard Response
Port Restrictor Plug Code
None
Operation
Solenoid Operated
Voltage & Frequency
24 VDC
Function
2-Position Spring Offset, End to End
Crossover
All Ports Open
Indicator Lights
No
Pressure [Max]
5075 psi
Solenoid Indicator Lights Code
None
Port T Code
2
Rated Flow [Max]
21 gal/min
Coil Type Code
F
Coil Rating Code
H
Reducer Module
N/A
Valve Type
High-Performance
Surge Suppressor/Damper
None
Spool Indicator Switch Code
S5
Spool Spring Arrangement Code
A
Surge Suppressor/Damper Code
None
Port Restrictor Plugs
None
Mechanical Options
None
NFPA Size
D03
Solenoid
Single
Function Code
0
EN Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Design No.
60
Spool Code
0
Actuator Type
Solenoid
AC/DC
DC
Electrical Options
None
Manual Override Option Code
None
Electrical Connection
No Connector
Pilot Valve Type
N/A
Pressure Port Check Valve Pressure
N/A
Solenoid Code
H
Spool Shift Timing
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
