These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Surge Suppressor/Damper Code
None
Port Restrictor Plugs
None
Crossover
All Ports Open
Seal Material
Buna-N
Port Restrictor Plug Code
None
Electrical Connection
No Connector
NFPA Size
D03
Response Type
Standard Response
Spool Shift Timing
N/A
Solenoid Energization Code
None
Surge Suppressor/Damper
None
Reducer Module
N/A
Spool Indicator Switch Code
S5
Valve Type
High-Performance
Electrical Options
None
Solenoid Code
H
Voltage & Frequency
24 VDC
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
EN Code
None
Spool Spring Arrangement Code
A
Pressure Port Check Valve Pressure
N/A
Coil Type Code
F
Design No.
60
Solenoid Indicator Lights Code
None
Spool Code
0
Manual Override Option Code
None
Function
2-Position Spring Offset, End to End
Pilot/Drain
None
Port T Pressure Rating
150 psi
Pressure [Max]
5075 psi
Cycle Rate [Max]
N/A
Actuator Type
Solenoid
Function Code
0
Center Position
All Ports Open
Coil Rating Code
H
Housing Code
W
Indicator Lights
No
AC/DC
DC
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Pilot Valve Type
N/A
Operation
Solenoid Operated
Overrides
No Overrides
Solenoid
Single
Electrical Connector Code
None
Port T Code
2
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
