These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pilot/Drain
None
Crossover
All Ports Open, Restricted
Coil Rating Code
HL
Function
3-Position Spring Centered
Coil Type Code
F
Solenoid Indicator Lights Code
L
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
NFPA Size
D03
Spool Shift Timing
N/A
Port Restrictor Plug Code
None
Spool Spring Arrangement Code
C
Pilot Valve Type
N/A
Response Type
Standard Response
EN Code
None
Electrical Connector Code
T
Port T Pressure Rating
3000 psi
Port Restrictor Plugs
None
Reducer Module
N/A
Function Code
8
Seal Material
Buna-N
Mechanical Options
None
Surge Suppressor/Damper Code
None
Pressure Port Check Valve Pressure
N/A
Electrical Connection
Wired Terminal Block
Valve Type
High-Performance
Overrides
No Overrides
Solenoid
Double
Solenoid Code
HL
Port T Code
7
Voltage & Frequency
24 VDC, Low Power Coil
Center Position
P to T, A & B Blocked
Rated Flow [Max]
21 gal/min
Cycle Rate [Max]
N/A
Operation
Solenoid Operated
Pressure [Max]
5075 psi
Design No.
61
Electrical Options
None
Surge Suppressor/Damper
None
Spool Indicator Switch Code
None
AC/DC
DC
Manual Override Option Code
None
Housing Code
W
Solenoid Energization Code
V
Indicator Lights
Yes
Actuator Type
Solenoid
Spool Code
8
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back