These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Operation
Solenoid Operated
Solenoid Code
HL
Coil Rating Code
HL
Port T Code
7
Manual Override Option Code
None
AC/DC
DC
Function
3-Position Spring Centered
Indicator Lights
Yes
Valve Type
High-Performance
Port Restrictor Plugs
None
Function Code
8
NFPA Size
D03
Surge Suppressor/Damper
None
EN Code
None
Cycle Rate [Max]
N/A
Spool Shift Timing
N/A
Overrides
No Overrides
Mechanical Options
None
Electrical Options
None
Surge Suppressor/Damper Code
None
Housing Code
W
Pressure Port Check Valve Pressure
N/A
Voltage & Frequency
24 VDC, Low Power Coil
Port T Pressure Rating
3000 psi
Solenoid
Double
Crossover
All Ports Open, Restricted
Solenoid Indicator Lights Code
L
Port Restrictor Plug Code
None
Reducer Module
N/A
Rated Flow [Max]
21 gal/min
Coil Type Code
F
Spool Indicator Switch Code
None
Center Position
P to T, A & B Blocked
Pressure [Max]
5075 psi
Spool Code
8
Electrical Connection
Wired Terminal Block
Seal Material
Buna-N
Pilot Valve Type
N/A
Spool Spring Arrangement Code
C
Electrical Connector Code
T
Solenoid Energization Code
V
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Design No.
61
Response Type
Standard Response
Actuator Type
Solenoid
Pilot/Drain
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back