02-301621

Vickers D05 Solenoid Valve

Item #102087877

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

These hoses can be used to convey hazardous chemicals, steam, hot liquids or other dangerous materials which can cause death, serious bodily injury including burns, pressure wounds or chemical exposure if released accidentally. They should, therefore, onl

Specifications

Rated Flow [Max]	25 gal/min
Coil Type	Flying Leads
Operation	Solenoid Operated
Overrides	No Overrides
Coil Type Code	None
Electrical Options Code	W
Seal Material	Buna-N
Port T Pressure Rating	1000 psi
Mechanical Options Code	LH
Crossover	All Ports Open
Center Position	All Ports Open
Cycle Rate [Max]	N/A
Solenoid	Single
Reducer Module	N/A
Pilot/Drain	None
Mechanical Options	Single Solenoid Reverse Assembly
Port Restrictor Plugs	None
Model No.	DG4S4W-010B-B-60-LH
Response Type	Standard Response
Function	2-Position Spring Centered, End to Center, Single End
Pressure [Max]	3600 psi
Indicator Lights	No
AC/DC	AC
Tank Port Rating	1000
Flow Direction Code	4
NFPA Size	D05
Voltage & Frequency	110/120 VAC - 50/60 Hz
Electrical Options	None
Pilot Valve Type	N/A
Spool Spring Arrangement Code	B
Coil Rating Code	B
Electrical Connection	KU W/ Deutsch Connector
Actuator Type	Solenoid
Spool Code	0
Valve Type	Standard-Duty
Pressure Port Check Valve Pressure	N/A
Surge Suppressor/Damper	None
Design No.	60
Weight	10.0 LB