02-301621

Vickers D05 Solenoid Valve

Item #102087877

Auto Replenish

each One-time purchase

Product Details

DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
Port connections are made by mounting the valve on a manifold or subplate containing the interface.
Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.

These hoses can be used to convey hazardous chemicals, steam, hot liquids or other dangerous materials which can cause death, serious bodily injury including burns, pressure wounds or chemical exposure if released accidentally. They should, therefore, onl

Specifications

Overrides	No Overrides
Valve Type	Standard-Duty
Reducer Module	N/A
NFPA Size	D05
Surge Suppressor/Damper	None
Mechanical Options	Single Solenoid Reverse Assembly
Port T Pressure Rating	1000 psi
Indicator Lights	No
Coil Type Code	None
Electrical Options Code	W
Voltage & Frequency	110/120 VAC - 50/60 Hz
Flow Direction Code	4
Response Type	Standard Response
Crossover	All Ports Open
Spool Code	0
Coil Rating Code	B
Cycle Rate [Max]	N/A
Rated Flow [Max]	25 gal/min
Function	2-Position Spring Centered, End to Center, Single End
Pilot/Drain	None
Actuator Type	Solenoid
Pressure Port Check Valve Pressure	N/A
Mechanical Options Code	LH
Operation	Solenoid Operated
AC/DC	AC
Coil Type	Flying Leads
Tank Port Rating	1000
Model No.	DG4S4W-010B-B-60-LH
Spool Spring Arrangement Code	B
Electrical Options	None
Pilot Valve Type	N/A
Solenoid	Single
Pressure [Max]	3600 psi
Electrical Connection	KU W/ Deutsch Connector
Center Position	All Ports Open
Seal Material	Buna-N
Port Restrictor Plugs	None
Design No.	60
Weight	10.0 LB