Find a Service Center
- Pressure Control Valve
- Pressure Reducing/Relieving Valve Type
- PRV1-10 Series
- Cartridge Only Port Size
- Cartridge Only Port Type
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Model No. | PRV1-10V-K-0-2/ |
| Pressure Setting | 125 psi |
| Pressure [Max] | 2300 psi |
| Temperature Range [Min] | -40 °F |
| Port Size | Cartridge Only |
| Adjustment Type | Knob |
| Recommend Filtration Level | 18/16/13 microns |
| Operation | Direct Acting |
| Seal Kit Viton | 889599 |
| Series | PRV1-10 |
| Leakage | 0.25 cc/min |
| No. of Housing Ports | 3 |
| Valve Torque into Cavity | 47 to 54 Nm |
| Style | Spool |
| Installation | Screw-in Cartridge |
| Cavity | C-10-3 |
| Flow [Max] | 4 gal/min |
| Cracking Pressure [Max] | 200 psi |
| Seal Material | Viton |
| Body Type | 2 |
| Port Type | Cartridge Only |
| Housing Material | Cartridge Only |
| Valve Material | Cartridge only |
| Operating Pressure [Min] | 51 psi |
| Pilot Ratio | 100:1 |
| Seal Kit Buna | 565804 |
| Type | Pressure Reducing/Relieving Valve |
| Manufacturer Part No. | PRV1-10V-K-0-2/ |
| No. of Valve Ports | 3 |
| Operating Pressure [Max] | 2300 psi |
| Temperature Range [Max] | 248 °F |
| Cracking Pressure [Min] | 50 psi |
| Weight | 0.54 LB |
