Find a Service Center
- Pressure Control Valve
- Pressure Reducing/Relieving Valve Type
- PRV1-10 Series
- Cartridge Only Port Size
- Cartridge Only Port Type
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Port Size | Cartridge Only |
| Installation | Screw-in Cartridge |
| Seal Kit Buna | 565804 |
| Valve Torque into Cavity | 47 to 54 Nm |
| No. of Housing Ports | 3 |
| Housing Material | Cartridge Only |
| Temperature Range [Max] | 248 °F |
| Operation | Direct Acting |
| Body Type | 2 |
| Adjustment Type | Knob |
| Operating Pressure [Max] | 2300 psi |
| Seal Material | Viton |
| Style | Spool |
| Seal Kit Viton | 889599 |
| Type | Pressure Reducing/Relieving Valve |
| No. of Valve Ports | 3 |
| Cracking Pressure [Min] | 50 psi |
| Cavity | C-10-3 |
| Valve Material | Cartridge only |
| Temperature Range [Min] | -40 °F |
| Cracking Pressure [Max] | 200 psi |
| Model No. | PRV1-10V-K-0-2/ |
| Pressure Setting | 125 psi |
| Series | PRV1-10 |
| Pressure [Max] | 2300 psi |
| Port Type | Cartridge Only |
| Flow [Max] | 4 gal/min |
| Leakage | 0.25 cc/min |
| Recommend Filtration Level | 18/16/13 microns |
| Pilot Ratio | 100:1 |
| Manufacturer Part No. | PRV1-10V-K-0-2/ |
| Operating Pressure [Min] | 51 psi |
| Weight | 0.54 LB |
