These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function
2-Position Spring Offset, End to End
Reducer Module
N/A
Crossover
All Ports Blocked
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Rated Flow [Max]
21 gal/min
Spool Spring Arrangement Code
AL
Response Type
Standard Response
Coil Type Code
F
Port T Pressure Rating
150 psi
Solenoid Code
B
Operation
Solenoid Operated
Electrical Connection
Wired Terminal Block
NFPA Size
D03
Indicator Lights
Yes
Pressure Port Check Valve Pressure
N/A
Voltage & Frequency
110/120 VAC – 50/60 Hz
Surge Suppressor/Damper Code
None
EN Code
None
Electrical Connector Code
T
Port Restrictor Plug Code
None
Surge Suppressor/Damper
None
AC/DC
AC
Center Position
All Ports Blocked
Spool Indicator Switch Code
S5
Function Code
2
Mechanical Options
None
Spool Code
2
Design No.
60
Electrical Options
None
Solenoid
Single
Pressure [Max]
5075 psi
Housing Code
W
Valve Type
High-Performance
Pilot/Drain
None
Spool Shift Timing
N/A
Port T Code
2
Solenoid Energization Code
None
Port Restrictor Plugs
None
Actuator Type
Solenoid
Pilot Valve Type
N/A
Solenoid Indicator Lights Code
L
Seal Material
Buna-N
Manual Override Option Code
None
Coil Rating Code
B
Overrides
No Overrides
Cycle Rate [Max]
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back