These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Operation
Solenoid Operated
EN Code
None
Solenoid Energization Code
None
Solenoid
Single
Solenoid Indicator Lights Code
L
Function Code
2
Electrical Options
None
Electrical Connector Code
T
Port T Pressure Rating
150 psi
Pilot Valve Type
N/A
Indicator Lights
Yes
Spool Shift Timing
N/A
Crossover
All Ports Blocked
Coil Type Code
F
Voltage & Frequency
110/120 VAC – 50/60 Hz
Mechanical Options
None
Spool Code
2
Housing Code
W
Manual Override Option Code
None
Pressure [Max]
5075 psi
Cycle Rate [Max]
N/A
Electrical Connection
Wired Terminal Block
Port T Code
2
Pressure Port Check Valve Pressure
N/A
Design No.
60
Spool Indicator Switch Code
S5
AC/DC
AC
Port Restrictor Plug Code
None
Pilot/Drain
None
Reducer Module
N/A
Solenoid Code
B
Overrides
No Overrides
Actuator Type
Solenoid
Coil Rating Code
B
Spool Spring Arrangement Code
AL
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Surge Suppressor/Damper
None
NFPA Size
D03
Rated Flow [Max]
21 gal/min
Function
2-Position Spring Offset, End to End
Valve Type
High-Performance
Port Restrictor Plugs
None
Surge Suppressor/Damper Code
None
Center Position
All Ports Blocked
Seal Material
Buna-N
Response Type
Standard Response
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back