Find a Service Center
- D05 Double Solenoid Operated Valve
- 24 VDC
- Lead Wires
- Connector Fitted
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Response Type | Standard Response |
| Seal Material | Buna-N |
| Electrical Connection | Lead Wires |
| Mechanical Options | None |
| Surge Suppressor/Damper | None |
| Flow Direction Code | 4 |
| NFPA Size | D05 |
| Pilot Valve Type | N/A |
| Design No. | 60 |
| Operation | Solenoid Operated |
| Function | 3-Position Spring Centered |
| Actuator Type | Solenoid |
| Crossover | P Blocked, A or B to T |
| Electrical Options Code | None |
| Solenoid | Double |
| Pressure Port Check Valve Pressure | N/A |
| Coil Rating Code | H |
| Rated Flow [Max] | 25 gal/min |
| Port T Pressure Rating | 1000 psi |
| Port Restrictor Plugs | None |
| Pressure [Max] | 3600 psi |
| Spool Spring Arrangement Code | C |
| Center Position | P Blocked, A & B to T |
| Voltage & Frequency | 24 VDC |
| Reducer Module | N/A |
| Valve Type | Standard-Duty |
| Mechanical Options Code | None |
| Coil Type | Connector Fitted |
| Overrides | No Overrides |
| Spool Code | 6 |
| Cycle Rate [Max] | N/A |
| AC/DC | DC |
| Coil Type Code | U1 |
| Pilot/Drain | None |
| Indicator Lights | No |
| Electrical Options | None |
| Weight | 10.0 LB |
