Find a Service Center
- D05 Double Solenoid Operated Valve
- 24 VDC
- Lead Wires
- Connector Fitted
- 3-Position Spring Centered
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Electrical Options Code | None |
| Overrides | No Overrides |
| Pilot/Drain | None |
| Reducer Module | N/A |
| Function | 3-Position Spring Centered |
| Port T Pressure Rating | 1000 psi |
| Cycle Rate [Max] | N/A |
| Operation | Solenoid Operated |
| Voltage & Frequency | 24 VDC |
| NFPA Size | D05 |
| Crossover | P Blocked, A or B to T |
| Coil Type | Connector Fitted |
| Electrical Options | None |
| Port Restrictor Plugs | None |
| Response Type | Standard Response |
| Pilot Valve Type | N/A |
| Mechanical Options Code | None |
| Spool Spring Arrangement Code | C |
| Design No. | 60 |
| Center Position | P Blocked, A & B to T |
| Surge Suppressor/Damper | None |
| Seal Material | Buna-N |
| Pressure Port Check Valve Pressure | N/A |
| Solenoid | Double |
| Electrical Connection | Lead Wires |
| Mechanical Options | None |
| Coil Type Code | U1 |
| Coil Rating Code | H |
| AC/DC | DC |
| Valve Type | Standard-Duty |
| Actuator Type | Solenoid |
| Pressure [Max] | 3600 psi |
| Rated Flow [Max] | 25 gal/min |
| Indicator Lights | No |
| Flow Direction Code | 4 |
| Spool Code | 6 |
| Weight | 10.0 LB |
