These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Surge Suppressor/Damper
None
Surge Suppressor/Damper Code
None
Mechanical Options
None
Rated Flow [Max]
21 gal/min
Voltage & Frequency
12 VDC
Valve Type
High-Performance
Overrides
No Overrides
Design No.
61
Port T Pressure Rating
3000 psi
Spool Indicator Switch Code
None
AC/DC
DC
Function
3-Position Spring Centered
Electrical Connection
No Connector
Actuator Type
Solenoid
Coil Type
Dual 6.3 mm Spade
Coil Type Code
SP2
Solenoid Code
G
Seal Material
Buna-N
Solenoid Indicator Lights Code
None
Housing Code
None
Manual Override Option Code
None
Port Restrictor Plug Code
None
Electrical Options
None
Port T Code
7
Electrical Connector Code
None
Pilot/Drain
None
Coil Rating Code
G
Operation
Solenoid Operated
Response Type
Standard Response
Spool Code
8
Spool Spring Arrangement Code
C
Solenoid
Double
Center Position
P to T, A & B Blocked
Spool Shift Timing
N/A
EN Code
None
Crossover
All Ports Open, Restricted
Pressure Port Check Valve Pressure
N/A
Port Restrictor Plugs
None
Reducer Module
N/A
Cycle Rate [Max]
N/A
Solenoid Energization Code
V
Pressure [Max]
5075 psi
Indicator Lights
No
Pilot Valve Type
N/A
Function Code
8
NFPA Size
D03
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
