These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Coil Type
Dual 6.3 mm Spade
Indicator Lights
No
Solenoid Code
G
NFPA Size
D03
Pilot Valve Type
N/A
Surge Suppressor/Damper Code
None
Solenoid Indicator Lights Code
None
Spool Indicator Switch Code
None
Spool Code
8
EN Code
None
Port T Code
7
Valve Type
High-Performance
Port Restrictor Plug Code
None
Function
3-Position Spring Centered
Center Position
P to T, A & B Blocked
Actuator Type
Solenoid
Pressure [Max]
5075 psi
Spool Spring Arrangement Code
C
Spool Shift Timing
N/A
Pilot/Drain
None
Crossover
All Ports Open, Restricted
Solenoid Energization Code
V
Cycle Rate [Max]
N/A
Seal Material
Buna-N
Mechanical Options
None
Overrides
No Overrides
Voltage & Frequency
12 VDC
Function Code
8
Coil Type Code
SP2
Solenoid
Double
AC/DC
DC
Port Restrictor Plugs
None
Rated Flow [Max]
21 gal/min
Port T Pressure Rating
3000 psi
Operation
Solenoid Operated
Surge Suppressor/Damper
None
Housing Code
None
Electrical Connection
No Connector
Reducer Module
N/A
Coil Rating Code
G
Design No.
61
Electrical Connector Code
None
Electrical Options
None
Manual Override Option Code
None
Response Type
Standard Response
Pressure Port Check Valve Pressure
N/A
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
