These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function Code
2
Surge Suppressor/Damper
None
EN Code
None
Indicator Lights
No
Cycle Rate [Max]
N/A
AC/DC
AC
NFPA Size
D03
Pilot/Drain
None
Housing Code
W
Function
2-Position Spring Offset, End to End
Voltage & Frequency
110/120 VAC – 50/60 Hz
Port Restrictor Plugs
None
Manual Override Option Code
None
Reducer Module
N/A
Design No.
60
Solenoid Energization Code
None
Overrides
No Overrides
Actuator Type
Solenoid
Spool Code
2
Spool Shift Timing
N/A
Coil Rating Code
B
Solenoid Code
B
Electrical Connection
Wired Terminal Block
Crossover
All Ports Blocked
Center Position
All Ports Blocked
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Operation
Solenoid Operated
Rated Flow [Max]
21 gal/min
Seal Material
Buna-N
Electrical Connector Code
T
Mechanical Options
None
Pilot Valve Type
N/A
Electrical Options
None
Response Type
Standard Response
Valve Type
High-Performance
Spool Indicator Switch Code
S5
Pressure [Max]
5075 psi
Port Restrictor Plug Code
None
Solenoid Indicator Lights Code
None
Spool Spring Arrangement Code
A
Port T Code
2
Solenoid
Single
Pressure Port Check Valve Pressure
N/A
Coil Type Code
F
Port T Pressure Rating
150 psi
Surge Suppressor/Damper Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back