These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Rated Flow [Max]
21 gal/min
Crossover
All Ports Blocked
Port Restrictor Plug Code
None
Spool Indicator Switch Code
S5
Spool Shift Timing
N/A
Coil Rating Code
B
Design No.
60
Reducer Module
N/A
Cycle Rate [Max]
N/A
Port Restrictor Plugs
None
Solenoid Indicator Lights Code
None
EN Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Seal Material
Buna-N
Pressure [Max]
5075 psi
Spool Spring Arrangement Code
A
Operation
Solenoid Operated
NFPA Size
D03
Coil Type Code
F
Solenoid Energization Code
None
Pilot/Drain
None
Port T Code
2
Mechanical Options
None
Center Position
All Ports Blocked
Spool Code
2
Electrical Options
None
Response Type
Standard Response
Function Code
2
Port T Pressure Rating
150 psi
AC/DC
AC
Electrical Connection
Wired Terminal Block
Overrides
No Overrides
Manual Override Option Code
None
Surge Suppressor/Damper
None
Pilot Valve Type
N/A
Housing Code
W
Electrical Connector Code
T
Surge Suppressor/Damper Code
None
Solenoid Code
B
Pressure Port Check Valve Pressure
N/A
Function
2-Position Spring Offset, End to End
Indicator Lights
No
Valve Type
High-Performance
Solenoid
Single
Voltage & Frequency
110/120 VAC – 50/60 Hz
Actuator Type
Solenoid
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back