These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Pilot Valve Type
N/A
Design No.
60
Cycle Rate [Max]
N/A
Solenoid Code
B
Port T Code
6
Center Position
All Ports Open
Solenoid
Single
Valve Type
High-Performance
Electrical Connector Code
PA5
Solenoid Energization Code
None
Spool Shift Timing
N/A
Spool Code
0
Function
2-Position Spring Offset, End to Center
Mechanical Options
None
NFPA Size
D03
Port T Pressure Rating
3000 psi
Seal Material
Buna-N
Surge Suppressor/Damper Code
None
Pilot/Drain
None
Electrical Options
None
Rated Flow [Max]
21 gal/min
Indicator Lights
Yes
Overrides
No Overrides
Port Restrictor Plugs
None
AC/DC
AC
Pressure Port Check Valve Pressure
N/A
Reducer Module
N/A
Housing Code
W
Spool Indicator Switch Code
None
Function Code
0
Crossover
All Ports Open
Coil Rating Code
B
Electrical Connection
Five Pin Connector
Pressure [Max]
5075 psi
Coil Type Code
F
Operation
Solenoid Operated
EN Code
None
Response Type
Standard Response
Spool Spring Arrangement Code
BL
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Solenoid Indicator Lights Code
L
Actuator Type
Solenoid
Surge Suppressor/Damper
None
Port Restrictor Plug Code
None
Voltage & Frequency
110/120 VAC – 50/60 Hz
Manual Override Option Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back