These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Indicator Lights
Yes
Spool Shift Timing
N/A
Center Position
All Ports Open
Seal Material
Buna-N
Housing Code
W
AC/DC
AC
Function
2-Position Spring Offset, End to Center
Solenoid Indicator Lights Code
L
Crossover
All Ports Open
NFPA Size
D03
Pilot/Drain
None
Function Code
0
Mechanical Options
None
Reducer Module
N/A
Operation
Solenoid Operated
EN Code
None
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Valve Type
High-Performance
Spool Code
0
Pressure [Max]
5075 psi
Pressure Port Check Valve Pressure
N/A
Pilot Valve Type
N/A
Port Restrictor Plugs
None
Spool Spring Arrangement Code
BL
Voltage & Frequency
110/120 VAC – 50/60 Hz
Electrical Options
None
Solenoid
Single
Electrical Connection
Five Pin Connector
Overrides
No Overrides
Spool Indicator Switch Code
None
Port T Code
6
Solenoid Energization Code
None
Coil Rating Code
B
Manual Override Option Code
None
Solenoid Code
B
Response Type
Standard Response
Coil Type Code
F
Electrical Connector Code
PA5
Rated Flow [Max]
21 gal/min
Surge Suppressor/Damper
None
Surge Suppressor/Damper Code
None
Port T Pressure Rating
3000 psi
Cycle Rate [Max]
N/A
Port Restrictor Plug Code
None
Actuator Type
Solenoid
Design No.
60
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back