These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
AC/DC
DC
Function Code
2
Housing Code
W
Mechanical Options
None
Center Position
All Ports Blocked
Electrical Connection
Five Pin Connector
Design No.
60
Spool Code
2
Reducer Module
N/A
Spool Spring Arrangement Code
AL
Spool Shift Timing
N/A
Port Restrictor Plug Code
None
Surge Suppressor/Damper Code
None
NFPA Size
D03
Solenoid Indicator Lights Code
L
Manual Override Option Code
None
Solenoid Energization Code
None
Operation
Solenoid Operated
Solenoid
Single
Actuator Type
Solenoid
Surge Suppressor/Damper
None
Pressure [Max]
5075 psi
Pilot/Drain
None
Pilot Valve Type
N/A
Spool Indicator Switch Code
None
Port Restrictor Plugs
None
Coil Rating Code
H
Indicator Lights
Yes
Response Type
Standard Response
Solenoid Code
H
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Overrides
No Overrides
Electrical Options
None
Rated Flow [Max]
21 gal/min
Voltage & Frequency
24 VDC
EN Code
None
Seal Material
Buna-N
Valve Type
High-Performance
Cycle Rate [Max]
N/A
Electrical Connector Code
PA5
Port T Pressure Rating
3000 psi
Coil Type Code
F
Pressure Port Check Valve Pressure
N/A
Function
2-Position Spring Offset, End to End
Crossover
All Ports Blocked
Port T Code
7
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
