These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Electrical Connection
Five Pin Connector
Electrical Connector Code
PA5
Center Position
All Ports Blocked
Port T Pressure Rating
3000 psi
Spool Spring Arrangement Code
AL
Coil Rating Code
H
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Pilot/Drain
None
Crossover
All Ports Blocked
Pressure [Max]
5075 psi
Housing Code
W
Seal Material
Buna-N
Valve Type
High-Performance
Electrical Options
None
Coil Type Code
F
Spool Indicator Switch Code
None
Reducer Module
N/A
Solenoid
Single
Port T Code
7
Operation
Solenoid Operated
Voltage & Frequency
24 VDC
Solenoid Indicator Lights Code
L
Port Restrictor Plugs
None
Response Type
Standard Response
Port Restrictor Plug Code
None
Manual Override Option Code
None
AC/DC
DC
Actuator Type
Solenoid
Surge Suppressor/Damper
None
Pressure Port Check Valve Pressure
N/A
Design No.
60
Solenoid Code
H
Mechanical Options
None
Surge Suppressor/Damper Code
None
Spool Shift Timing
N/A
Overrides
No Overrides
Indicator Lights
Yes
Pilot Valve Type
N/A
NFPA Size
D03
Function
2-Position Spring Offset, End to End
Rated Flow [Max]
21 gal/min
Cycle Rate [Max]
N/A
Spool Code
2
Solenoid Energization Code
None
Function Code
2
EN Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
