These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Rated Flow [Max]
21 gal/min
Crossover
All Ports Blocked
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Electrical Options
None
Mechanical Options
None
NFPA Size
D03
Valve Type
High-Performance
Overrides
No Overrides
Actuator Type
Solenoid
Function
2-Position Spring Offset, End to End
Pressure Port Check Valve Pressure
N/A
Solenoid Energization Code
None
Electrical Connection
No Connector
Surge Suppressor/Damper Code
None
Indicator Lights
No
Solenoid Code
H
Reducer Module
N/A
Coil Type Code
F
Port Restrictor Plug Code
None
Solenoid
Single
Port T Pressure Rating
150 psi
Spool Code
2
Spool Indicator Switch Code
S5
Voltage & Frequency
24 VDC
Port T Code
2
Center Position
All Ports Blocked
Pressure [Max]
5075 psi
Function Code
2
Electrical Connector Code
None
Manual Override Option Code
None
Port Restrictor Plugs
None
Spool Spring Arrangement Code
A
Housing Code
W
Seal Material
Buna-N
Response Type
Standard Response
Cycle Rate [Max]
N/A
Coil Rating Code
H
Pilot/Drain
None
Pilot Valve Type
N/A
Surge Suppressor/Damper
None
EN Code
None
Solenoid Indicator Lights Code
None
Operation
Solenoid Operated
Design No.
60
Spool Shift Timing
N/A
AC/DC
DC
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
