These solenoid operated directional control valves are for directing and stopping flow at any point in a hydraulic system. The 60-design series has been specially designed and developed to cover expanded demands in the industry as well as the many traditional uses of the earlier designs.
features
Efficient control of greater hydraulic powers without increasing solenoid power consumption
Multi-fluid capability without the need to change seals
Solenoid coils can be changed quickly and easily without leakage from the hydraulic system
Compact, cost-effective system design when used with Vickers SystemStak valves and subplates
Up to 21 gpm at 5,000 psi
Valve mounting face conforms to ISO 4401, size 03, and is compatible with related international standards
Function
2-Position Spring Offset, End to End
Coil Type
Flying Leads, 1/2 NPT Thread Wiring Housing
Housing Code
W
Design No.
60
Coil Type Code
F
Spool Indicator Switch Code
S5
Spool Spring Arrangement Code
A
Indicator Lights
No
Actuator Type
Solenoid
Electrical Connector Code
None
Pressure [Max]
5075 psi
Voltage & Frequency
24 VDC
Cycle Rate [Max]
N/A
Surge Suppressor/Damper Code
None
EN Code
None
Solenoid Code
H
Crossover
All Ports Blocked
Function Code
2
Operation
Solenoid Operated
Reducer Module
N/A
Port Restrictor Plugs
None
Valve Type
High-Performance
Mechanical Options
None
Surge Suppressor/Damper
None
Manual Override Option Code
None
Electrical Connection
No Connector
Overrides
No Overrides
Port T Code
2
Seal Material
Buna-N
Port T Pressure Rating
150 psi
Coil Rating Code
H
Solenoid
Single
Pilot Valve Type
N/A
Solenoid Indicator Lights Code
None
AC/DC
DC
Electrical Options
None
Pilot/Drain
None
Pressure Port Check Valve Pressure
N/A
Spool Shift Timing
N/A
Response Type
Standard Response
Port Restrictor Plug Code
None
Rated Flow [Max]
21 gal/min
Spool Code
2
Center Position
All Ports Blocked
NFPA Size
D03
Solenoid Energization Code
None
Weight
5.0 LB
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
