Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End to Center, Single End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Voltage & Frequency | 24 VDC |
| Spool Code | 2 |
| Indicator Lights | No |
| Temperature Range [Min] | 68 °F |
| Mechanical Options | None |
| Cycle Rate [Max] | N/A |
| Mounting | Subplate/Manifold Mount |
| Crossover | All Ports Blocked |
| AC/DC | DC |
| Manual Override | Plain Override |
| NFPA Size | D05 |
| Model No. | DG4S4-012B-H-60 |
| Pressure Port Check Valve Pressure | N/A |
| Coil Type Code | None |
| Leakage | Standard Performance |
| Response Time | 50 to 80 ms |
| Pilot/Drain | None |
| Design No. | 60 |
| No. of Stages | Single Stage |
| Port Restrictor Plugs | None |
| Response Type | Standard Response |
| Flow Direction Code | 4 |
| Port T Pressure Rating | 1000 psi |
| Electrical Options Code | None |
| Solenoid | Single |
| Pilot Valve Type | N/A |
| Coil Rating Code | H |
| Valve Type | Standard-Duty |
| Actuator Type | Solenoid |
| Center Position | All Ports Blocked |
| Fluid Cleanliness | 19/17/14 micron |
| Tank Port Rating | 1000 |
| Overrides | No Overrides |
| Surge Suppressor/Damper | None |
| Operation | Solenoid Operated |
| Function | 2-Position Spring Centered, End to Center, Single End |
| Watt Rating | 30 W |
| Electrical Options | None |
| Pressure [Max] | 4500 psi |
| Reducer Module | N/A |
| Temperature Range [Max] | 122 °F |
| Compatible Fluids | Petroleum Oil |
| Electrical Connection | KU W/ Deutsch Connector |
| Spool Spring Arrangement Code | B |
| Body Material | Gray Iron |
| Seal Material | Buna-N |
| Rated Flow [Max] | 24 gal/min |
| Actuation Identification | Solenoid B |
| Coil Type | Flying Leads |
| Performance | Standard Performance |
| Mechanical Options Code | None |
| Weight | 10.0 LB |
