- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Single Solenoid
- 2-Position Spring Centered, End to Center, Single End Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- When the drive is operated on other than horizontal shafts, or when the center distance is greater than eight times the diameter of the smaller pulley on drive ratios less than 3:1, both pulleys should be flanged
- When a drive has three pulleys, at least two should be flanged
- If the drive has more than three pulleys, every other pulley should be flanged
| Mechanical Options | None |
| Solenoid | Single |
| Coil Type | Flying Leads |
| Actuator Type | Solenoid |
| Actuation Identification | Solenoid B |
| Surge Suppressor/Damper | None |
| Center Position | All Ports Blocked |
| Reducer Module | N/A |
| Indicator Lights | No |
| Body Material | Gray Iron |
| Model No. | DG4S4-012B-H-60 |
| Rated Flow [Max] | 24 gal/min |
| Pressure [Max] | 4500 psi |
| Electrical Connection | KU W/ Deutsch Connector |
| Pilot/Drain | None |
| Compatible Fluids | Petroleum Oil |
| Leakage | Standard Performance |
| Temperature Range [Max] | 122 °F |
| Coil Type Code | None |
| Manual Override | Plain Override |
| Port T Pressure Rating | 1000 psi |
| Mounting | Subplate/Manifold Mount |
| Operation | Solenoid Operated |
| Voltage & Frequency | 24 VDC |
| Mechanical Options Code | None |
| Cycle Rate [Max] | N/A |
| Performance | Standard Performance |
| Design No. | 60 |
| Electrical Options | None |
| Crossover | All Ports Blocked |
| Tank Port Rating | 1000 |
| Watt Rating | 30 W |
| Function | 2-Position Spring Centered, End to Center, Single End |
| Electrical Options Code | None |
| Coil Rating Code | H |
| Pressure Port Check Valve Pressure | N/A |
| Response Time | 50 to 80 ms |
| Valve Type | Standard-Duty |
| Response Type | Standard Response |
| Fluid Cleanliness | 19/17/14 micron |
| Overrides | No Overrides |
| NFPA Size | D05 |
| Pilot Valve Type | N/A |
| Port Restrictor Plugs | None |
| Spool Code | 2 |
| Spool Spring Arrangement Code | B |
| No. of Stages | Single Stage |
| Temperature Range [Min] | 68 °F |
| Flow Direction Code | 4 |
| Seal Material | Buna-N |
| AC/DC | DC |
| Weight | 10.0 LB |

