Find a Service Center
- Solenoid Actuated Valve
- Solenoid Operated Operation
- D05 NFPA Size
- Double Solenoid
- 3-Position Spring Centered Function
description
- DGS4S models are direct solenoid operated directional control valves. Their primary function in a hydraulic circuit is to direct fluid flow to a work cylinder or to control the direction of rotation of a hydraulic motor.
- Port connections are made by mounting the valve on a manifold or subplate containing the interface.
- Electrical connections to the valve are made in an electrical wiring housing or by various plug-in devices. A ground terminal is provided.
caution
- Any sliding spool valve, if held for long periods of time, may stick and not spring return due to fluid residue formation and therefore should be cycled periodically to prevent this from happening
| Port T Pressure Rating | 1000 psi |
| Surge Suppressor/Damper | None |
| Response Type | Standard Response |
| Actuation Identification | Solenoid A, Solenoid B |
| Crossover | All Ports Blocked |
| Center Position | All Ports Blocked |
| Tank Port Rating | 1000 |
| AC/DC | DC |
| Fluid Cleanliness | 19/17/14 micron |
| Coil Rating Code | X |
| Mechanical Options | None |
| Flow Direction Code | 4 |
| Mounting | Subplate/Manifold Mount |
| Temperature Range [Max] | 122 °F |
| Reducer Module | N/A |
| Leakage | Standard Performance |
| Coil Type | Flying Leads |
| Electrical Connection | Lead Wires w/o Terminal Box |
| Model No. | DG4S4-012C-X-60 |
| Electrical Options | None |
| Pilot Valve Type | N/A |
| Overrides | No Overrides |
| Pressure Port Check Valve Pressure | N/A |
| Function | 3-Position Spring Centered |
| Rated Flow [Max] | 24 gal/min |
| Body Material | Gray Iron |
| Mechanical Options Code | None |
| Electrical Options Code | None |
| Port Restrictor Plugs | None |
| Voltage & Frequency | 250 VDC |
| Coil Type Code | None |
| Valve Type | Standard-Duty |
| Pilot/Drain | None |
| Cycle Rate [Max] | N/A |
| Actuator Type | Solenoid |
| No. of Stages | Single Stage |
| NFPA Size | D05 |
| Spool Code | 2 |
| Spool Spring Arrangement Code | C |
| Compatible Fluids | Petroleum Oil |
| Performance | Standard Performance |
| Manual Override | Plain Override |
| Pressure [Max] | 4500 psi |
| Temperature Range [Min] | 68 °F |
| Indicator Lights | No |
| Operation | Solenoid Operated |
| Solenoid | Double |
| Design No. | 60 |
| Seal Material | Buna-N |
| Weight | 10.0 LB |
